ENGLISH
RUSSIAN
Thermoelectric Modules
"S" - Series, "Standard"
High performance thermoelectric modules for traditional cooling applications (refrigeration, electronics, industrial, automotive).
- Maximum temperature for short time (to mount a module into unit): 130°C
- Recommended operating temperature: up to 120°C
- Max ΔT: up to 75°C (at Thot = 25°C)
- Cycling stability in ON-OFF power mode: over 10.000 cycles (cycle time is 60 seconds or more)
- Recommended operation current: 0.7 of Imax
- Recommended operation voltage: 0.8 of Umax
- Wires: UL-1569, PVC insulated
"R" - Series, "Reliance"
High performance thermoelectric modules for traditional cooling applications (refrigeration, electronics, industrial, automotive).
- Maximum temperature for short time (to mount a module into unit): 120°C
- Recommended operating temperature: up to 90°C
- Max ΔT: up to 75°C (at Thot = 25°C)
- Cycling stability in ON-OFF power mode: over 30.000 cycles (cycle time is 60 seconds or more)
- Cycling stability in 20/80 power mode: over 10.000 cycles
- Mechanical strength
- Recommended operation current: 0.7 of Imax
- Recommended operation voltage: 0.8 of Umax
- Wires: UL-1569, PVC insulated
"C" - Series, "Cycle"
High performance thermoelectric modules for long lifetime power cycling (cooling/heating).
- Maximum temperature for short time (to mount a module into unit): 130°C
- Recommended operating temperature: up to 120°C
- Recommended operation current: 0.7 of Imax
- Max ΔT: up to 75°C (at Thot = 25°C)
- Cycling stability in ON-OFF power mode: over 40.000 cycles (cycle time is 60 seconds or more)
- Cycling stability in 20/80 power mode: up to 10.000 cycles
"H" - Series, "Hot"
High performance thermoelectric modules for high temperature applications.
- Maximum temperature for short time (to mount a module into unit): 200°C
- Recommended operating temperature: up to 150°C
- Max ΔT: up to 73°C (at Thot = 25°C)
- Cycling stability in ON-OFF power mode: over 10.000 cycles (cycle time is 60 seconds or more)
- Recommended operation current: 0.7 of Imax
"D" - Series, High Power Density Modules ("HPDM")
High performance thermoelectric modules for the applications where device (lasers, chip tests devices, etc.) generates a lot of heat that need to be dissipated continuously or for a short time.
- Recommended operating temperature: up to 120°C
- Recommended operation current: 0.5 - 0.7 of Imax
- Cycling stability in ON-OFF power mode: over 40.000 cycles (cycle time is 60 seconds or more)
- Cycling stability in 20/80 power mode: up to 10.000 cycles
Definitions:
Imax - Maximum current, input current resulting in ΔT= ΔTmax;
Umax - Voltage at ΔT= ΔTmax;
Qmax - Maximum heat pumping capacity at I= Imax and ΔT= 0, measured in vacuum;
ΔTmax - Maximum temperature difference at I= Imax and Qmax= 0, measured in vacuum;
Thot - Module hot side temperature;
AxB - Cold/Hot side dimensions;
H - Total height of module.